EDS-408A-3M-SC

8-port switch EDS-408A-3M-SC is an improved version of a managed switch of 400 series for construction of complex scalable industrial networks. The front panel houses 5 copper and 3 optical Ethernet ports. Ports of 100BaseFX type allow data to be transmitted over multi-mode optical fiber at the distance up to 5 km. The switch allows not only integrating terminal devices and intermediate servers into Fast Ethernet networks, but also managing them using various intelligent functions supported by the switch. Ethernet switch EDS-408A-3M-SC: description and features: The switch conforms to IPv6 standard requirements. The device supports functions of effective management, monitoring and traffic optimization: SNMP v1/v2/v3, RMON, IGMP v1/v2, GMRP, 802.1Q VLAN, GVRP, QoS, DHCP Option 82. IEEE 802.1X, HTTPS, and SSH protocol serve for user authentication, data encryption and tunneling. All necessary software protection functions are provided: restricted bandwidth, port mirroring for status diagnostics and a discrete output relay channel for alarm notification of a user. Installation and setup of operation modes can be performed using Telnet, a console port, switches, and a web interface. Simple system of panel indication informs about power supply failure and a device status. Mean time between failures (MTBF) is 40 years. Optical ports of EDS-408A-3M-SC switch discover new opportunities for communication with remote objects, in case you can’t afford purchasing a fully equipped optical switch. In addition, using the software protection functions, these ports can be applied in Turbo Ring and Turbo Chain ring topologies of signal redundancy, in order to increase the communication reliability and minimize the recovery time. The model conforms to most European security certificates, as well as to field-specific certificates for application on railway transport, in marine industry, and in oil and gas sector. To discover the full potential of EDS-408A-3M-SC, it is required to design a network architecture project and analyze the equipment configuration requirements.

8-port switch EDS-408A-3M-SC is an improved version of a managed switch of 400 series for construction of complex scalable industrial networks. The front panel houses 5 copper and 3 optical Ethernet ports. Ports of 100BaseFX type allow data to be transmitted over multi-mode optical fiber at the distance up to 5 km. The switch allows not only integrating terminal devices and intermediate servers into Fast Ethernet networks, but also managing them using various intelligent functions supported by the switch. Ethernet switch EDS-408A-3M-SC: description and features: The switch conforms to IPv6 standard requirements. The device supports functions of effective management, monitoring and traffic optimization: SNMP v1/v2/v3, RMON, IGMP v1/v2, GMRP, 802.1Q VLAN, GVRP, QoS, DHCP Option 82. IEEE 802.1X, HTTPS, and SSH protocol serve for user authentication, data encryption and tunneling. All necessary software protection functions are provided: restricted bandwidth, port mirroring for status diagnostics and a discrete output relay channel for alarm notification of a user. Installation and setup of operation modes can be performed using Telnet, a console port, switches, and a web interface. Simple system of panel indication informs about power supply failure and a device status. Mean time between failures (MTBF) is 40 years. Optical ports of EDS-408A-3M-SC switch discover new opportunities for communication with remote objects, in case you can’t afford purchasing a fully equipped optical switch. In addition, using the software protection functions, these ports can be applied in Turbo Ring and Turbo Chain ring topologies of signal redundancy, in order to increase the communication reliability and minimize the recovery time. The model conforms to most European security certificates, as well as to field-specific certificates for application on railway transport, in marine industry, and in oil and gas sector. To discover the full potential of EDS-408A-3M-SC, it is required to design a network architecture project and analyze the equipment configuration requirements.