EDS-316-SS-SC

Unmanaged switch EDS-316-SS-SC by MOXA represents the line of unmanaged Ethernet switches with 16 ports for deployment of complex scalable networks. 2 ports refer to 100 Base FX standard with SC slots and are provided to transmit data over single-mode optical fiber. The design envisages enhanced protection: an industrial grade metal housing that conforms to IP 30, a redundant power supply circuit, an alerting channel, protection against broadcast storms. L2 network switchEDS-316-SS-SC: description and features: 10/100 Base TX: ports: 14. Slots: RJ-45. 100 Base FX ports: 2. Slots: SC. Single-mode communication distance: 40 km. Wave length: 1310 nm. TX: 0…-5 dBm. RX: -34 dBm. Budget: 29 dB. Dispersion penalty: -3 dBm. The functions of direct (802.3x) and backward (Back Pressure) flow control prevent data loss in half-duplex and full-duplex modes by stopping the transmission in case of the receiving port buffer overflow. 802.3x Flow Control standard secures the support of full-duplex communication and compatibility with DIX. The operation modes can be set up using switches (e.g. when choosing a port for alerting on failures and activating broadcast storm protection), whereas a light indication system informs about the device and communication state. A redundant power input activates a backup accumulator, if the main power source fails. The electronic components are effectively protected by the IP30 industrial grade chassis from vibrations, shocks (МЭК-60068/IEC 60068), electrostatic exposure and impulse interference (EN-55022, EN-61000, FCC). The switch supports Turbo Ring redundancy technology for fast network operation recovery. Mean time between failures (MTBF standard) is around 30 years. The switch EDS-316-SS-SC can be applied in any objects when it is required to construct a high-speed flexible and scalable industrial network. UL/cUL Class I Division 2 and ATEX Zone 2 certificates allow you to use the switch in explosion hazardous conditions of oil and gas recovery industry, whereas, DNV and GL certificates enable its marine application. The affordable price of this switch will not affect your investment budget and justifies rich features of the device. The design quality makes it clear that the device can be deployed, configured and left working until the next network maintenance routine.

Unmanaged switch EDS-316-SS-SC by MOXA represents the line of unmanaged Ethernet switches with 16 ports for deployment of complex scalable networks. 2 ports refer to 100 Base FX standard with SC slots and are provided to transmit data over single-mode optical fiber. The design envisages enhanced protection: an industrial grade metal housing that conforms to IP 30, a redundant power supply circuit, an alerting channel, protection against broadcast storms. L2 network switchEDS-316-SS-SC: description and features: 10/100 Base TX: ports: 14. Slots: RJ-45. 100 Base FX ports: 2. Slots: SC. Single-mode communication distance: 40 km. Wave length: 1310 nm. TX: 0…-5 dBm. RX: -34 dBm. Budget: 29 dB. Dispersion penalty: -3 dBm. The functions of direct (802.3x) and backward (Back Pressure) flow control prevent data loss in half-duplex and full-duplex modes by stopping the transmission in case of the receiving port buffer overflow. 802.3x Flow Control standard secures the support of full-duplex communication and compatibility with DIX. The operation modes can be set up using switches (e.g. when choosing a port for alerting on failures and activating broadcast storm protection), whereas a light indication system informs about the device and communication state. A redundant power input activates a backup accumulator, if the main power source fails. The electronic components are effectively protected by the IP30 industrial grade chassis from vibrations, shocks (МЭК-60068/IEC 60068), electrostatic exposure and impulse interference (EN-55022, EN-61000, FCC). The switch supports Turbo Ring redundancy technology for fast network operation recovery. Mean time between failures (MTBF standard) is around 30 years. The switch EDS-316-SS-SC can be applied in any objects when it is required to construct a high-speed flexible and scalable industrial network. UL/cUL Class I Division 2 and ATEX Zone 2 certificates allow you to use the switch in explosion hazardous conditions of oil and gas recovery industry, whereas, DNV and GL certificates enable its marine application. The affordable price of this switch will not affect your investment budget and justifies rich features of the device. The design quality makes it clear that the device can be deployed, configured and left working until the next network maintenance routine.