EDS-316-M-ST

Unmanaged switch EDS-316-M-ST is a perfect unmanaged Ethernet switch for creation of large and flexible industrial infrastructure. The device features 15 coppers ports of 10/100 Base TX standard with RJ-45 slots and one optical port of 100 Base FX standard, ST slot. It is used to transmit data over distances of up to 5 km. The switch design envisages enhanced protection: an industrial grade metal housing that rates IP 30, a redundant power supply circuit, an alerting channel, protection against broadcast storms. Network switch EDS-316-M-ST: description and features: The functions of direct (802.3x) and backward (Back Pressure) flow control prevent data loss in half-duplex and full-duplex modes by stopping the transmission in case of the receiving port buffer overflow. The operation modes can be set up using switches (e.g. when choosing a port for alerting on failures and activating broadcast storm protection), whereas a light indication system informs about the device and communication state. The switch supports Turbo Ring redundancy technology for fast network operation recovery. The device supports functions of direct and backward flow control (802.3x Flow Control, Back Pressure), speed auto negotiation and interface type auto detection (Auto MDI/MDI-X). The switch supports all standard protocols, and offers new features: EEE 802.1X — for extended user authentication; LACP Port Trunking — for flexible network connections; IGMP Snooping — for data packet filtration; RARP (DHCP/BootP servers) — for IP address allocation to peripheral devices. For checking network and terminal devices state, there is port mirroring available. The device provides access to the dedicated MAC addresses and manages the network over SNMP-OPC server. UL/cUL Class I Division 2 and ATEX Zone 2 certificates allow you to use the switch in explosion hazardous conditions of oil and gas recovery industry, whereas, DNV and GL certificates enable its marine application. The electronic components are effectively protected by the IP30 industrial grade chassis from vibrations, shocks (МЭК-60068/IEC 60068), electrostatic exposure and impulse interference (EN-55022, EN-61000, FCC). Mean time between failures (MTBF standard) is around 30 years. Network switch EDS-316-M-ST is protected on software and hardware levels and supports all necessary protocols. The optical port allows expanding the operation area of a network engineer, as the device is capable of functioning nearly in any industrial sphere. The affordable price of this switch shall not affect your investment budget and is justified by the device features and abilities.

Unmanaged switch EDS-316-M-ST is a perfect unmanaged Ethernet switch for creation of large and flexible industrial infrastructure. The device features 15 coppers ports of 10/100 Base TX standard with RJ-45 slots and one optical port of 100 Base FX standard, ST slot. It is used to transmit data over distances of up to 5 km. The switch design envisages enhanced protection: an industrial grade metal housing that rates IP 30, a redundant power supply circuit, an alerting channel, protection against broadcast storms. Network switch EDS-316-M-ST: description and features: The functions of direct (802.3x) and backward (Back Pressure) flow control prevent data loss in half-duplex and full-duplex modes by stopping the transmission in case of the receiving port buffer overflow. The operation modes can be set up using switches (e.g. when choosing a port for alerting on failures and activating broadcast storm protection), whereas a light indication system informs about the device and communication state. The switch supports Turbo Ring redundancy technology for fast network operation recovery. The device supports functions of direct and backward flow control (802.3x Flow Control, Back Pressure), speed auto negotiation and interface type auto detection (Auto MDI/MDI-X). The switch supports all standard protocols, and offers new features: EEE 802.1X — for extended user authentication; LACP Port Trunking — for flexible network connections; IGMP Snooping — for data packet filtration; RARP (DHCP/BootP servers) — for IP address allocation to peripheral devices. For checking network and terminal devices state, there is port mirroring available. The device provides access to the dedicated MAC addresses and manages the network over SNMP-OPC server. UL/cUL Class I Division 2 and ATEX Zone 2 certificates allow you to use the switch in explosion hazardous conditions of oil and gas recovery industry, whereas, DNV and GL certificates enable its marine application. The electronic components are effectively protected by the IP30 industrial grade chassis from vibrations, shocks (МЭК-60068/IEC 60068), electrostatic exposure and impulse interference (EN-55022, EN-61000, FCC). Mean time between failures (MTBF standard) is around 30 years. Network switch EDS-316-M-ST is protected on software and hardware levels and supports all necessary protocols. The optical port allows expanding the operation area of a network engineer, as the device is capable of functioning nearly in any industrial sphere. The affordable price of this switch shall not affect your investment budget and is justified by the device features and abilities.