EDS-G308-2SFP-T

EDS-G308-2SFP-T is an improved modification of a popular powerful unmanaged Gigabit switch. Unlike in the basic model G308, in this model 6 out of 8 combined ports refer to 10/100/1000 Base TX (twisted pair) type, whereas 2 ports are equipped with SFP slots for connection of a fiber optical cable, which allows you to increase the transmission distance and interference protection. The device supports the extended operating temperature range, provides a redundant power supply circuit and corresponds to the strict requirements to industrial automation systems. EDS-G308-2SFP-T by MOXA: description and features: The device supports most of modern specifications of the Gigabit communication: 1000 Base TX, SX, LX, LHX, ZX. 802.3Az standard uses a power efficient mode: power consumption is reduced at the time of low network activity. The device uses maximum reliable switching algorithm with intermediate storage (Store and Forward). The MAC address table has been expanded up to 8 thousand, the packet buffer has been enlarged up to 4 Mbit. This increases the wideband traffic localization and reduces latency. There is support of data flow management (802.3x Flow Control) that allows pausing the transmission in case of overflow of a receiving port buffer in half-duplex and full-duplex communication modes. There is protection against broadcast storms (double-throw switch), as well as a jumbo frame switch and a discrete output relay channel for alerting on power failures and communication disruptions. The power supply redundancy secures uninterruptible operation. Input DC voltage: 9.6…60 V. Power consumption: 8.16 W. Mean time between failures (MTBF standard) is around 40 years. The innovative features of EDS-G308-2SFP-T design made it possible for the device to operate at temperatures ranged from -40 to +75 °С, which allows you to deploy the device nearly in any weather and industrial conditions. The quality of protection against physical actions and electromagnetic exposure is confirmed by the flied-specific certificates. Hence, this model is a greatly reliable device with combined opportunities of Gigabit communication over copper and fiber optical routes, thus, providing numerous advantages.

EDS-G308-2SFP-T is an improved modification of a popular powerful unmanaged Gigabit switch. Unlike in the basic model G308, in this model 6 out of 8 combined ports refer to 10/100/1000 Base TX (twisted pair) type, whereas 2 ports are equipped with SFP slots for connection of a fiber optical cable, which allows you to increase the transmission distance and interference protection. The device supports the extended operating temperature range, provides a redundant power supply circuit and corresponds to the strict requirements to industrial automation systems. EDS-G308-2SFP-T by MOXA: description and features: The device supports most of modern specifications of the Gigabit communication: 1000 Base TX, SX, LX, LHX, ZX. 802.3Az standard uses a power efficient mode: power consumption is reduced at the time of low network activity. The device uses maximum reliable switching algorithm with intermediate storage (Store and Forward). The MAC address table has been expanded up to 8 thousand, the packet buffer has been enlarged up to 4 Mbit. This increases the wideband traffic localization and reduces latency. There is support of data flow management (802.3x Flow Control) that allows pausing the transmission in case of overflow of a receiving port buffer in half-duplex and full-duplex communication modes. There is protection against broadcast storms (double-throw switch), as well as a jumbo frame switch and a discrete output relay channel for alerting on power failures and communication disruptions. The power supply redundancy secures uninterruptible operation. Input DC voltage: 9.6…60 V. Power consumption: 8.16 W. Mean time between failures (MTBF standard) is around 40 years. The innovative features of EDS-G308-2SFP-T design made it possible for the device to operate at temperatures ranged from -40 to +75 °С, which allows you to deploy the device nearly in any weather and industrial conditions. The quality of protection against physical actions and electromagnetic exposure is confirmed by the flied-specific certificates. Hence, this model is a greatly reliable device with combined opportunities of Gigabit communication over copper and fiber optical routes, thus, providing numerous advantages.