EDS-205A-S-SC-T

Network switch EDS-205A-S-SC-T by MOXA. From its counterparts, the device differs by a metal chassis that conforms to IP30 and a dual power supply circuit. The device has passed all field-specific tests and complies with strict requirements to the industrial automation systems. The model features 4 Ethernet communication ports of 10/100 Base TX standard with support of MDI/MDI-X interfaces that facilitates client connection significantly. There is also an optical port of 100BaseFX standard (SC type) to transmit data over single-mode fiber at the distances up to 40 km. Due to its design features, the switch can be used at extreme temperatures ranged from -40 to +85°C. Unmanaged switch EDS-205A-S-SC-T: description and features: Flow management functions (IEEE 802.3x Flow Control, Back Pressure Flow Control) allow the switch to operate in two communication modes - full-duplex, half-duplex. Store and Forward switching method enables frames transmission only after error checking is done, which contributes to the greater transfer reliability. DIP switches help to protect the device from broadcast storms and prevent network overloads. Mean time between failures (MTBF) - over 350 years. EDS-205A-S-SC-T can assist you in creation of small industrial networks with one highly remote segment. The wide input DC and AC voltage range allows integrating the device with no additional equipment purchased. The device is protected from electromagnetic interference (EN 55022 Class A, FCC Part 15 Subpart B Class A), that can be generated by the equipment located in the same cabinet.

Network switch EDS-205A-S-SC-T by MOXA. From its counterparts, the device differs by a metal chassis that conforms to IP30 and a dual power supply circuit. The device has passed all field-specific tests and complies with strict requirements to the industrial automation systems. The model features 4 Ethernet communication ports of 10/100 Base TX standard with support of MDI/MDI-X interfaces that facilitates client connection significantly. There is also an optical port of 100BaseFX standard (SC type) to transmit data over single-mode fiber at the distances up to 40 km. Due to its design features, the switch can be used at extreme temperatures ranged from -40 to +85°C. Unmanaged switch EDS-205A-S-SC-T: description and features: Flow management functions (IEEE 802.3x Flow Control, Back Pressure Flow Control) allow the switch to operate in two communication modes - full-duplex, half-duplex. Store and Forward switching method enables frames transmission only after error checking is done, which contributes to the greater transfer reliability. DIP switches help to protect the device from broadcast storms and prevent network overloads. Mean time between failures (MTBF) - over 350 years. EDS-205A-S-SC-T can assist you in creation of small industrial networks with one highly remote segment. The wide input DC and AC voltage range allows integrating the device with no additional equipment purchased. The device is protected from electromagnetic interference (EN 55022 Class A, FCC Part 15 Subpart B Class A), that can be generated by the equipment located in the same cabinet.