EDS-205A-M-SC-T

Unmanaged switch EDS-205A-M-SC is the most robust model among the product line. The industrial grade metal chassis with protection according to IP 30 houses 4 high speed Ethernet ports of 10/100 Base TX standard and 1 port of 100 BaseFX standard to transfer data over single-mode optical fiber at the distance of up to 40 km. The electronic components and redundant dual power supply circuit secure the device stable operation at extreme temperatures ranged fr om -40 to +75 °C. Network switch EDS-205A-M-SC-T: description and features: Store and Forward switching method allows frame transfer only after error checking is complete, thus, contributing to the device reliability. The large MAC address table (1 K) increases the network determination. 802.3u standard ensures operation at the rate of up to 100 Mbit/s and provides auto negotiation with previous protocol versions. 802.3x Flow Control standard secures the support of full-duplex communication and compatibility with DIX. Voltage: DC — from 9.6 to 60 V, AC — from 18 to 30 V. EDS-205A manufactured by MOXA consumes 2.4 W (0.1 at 24 V) only. There is protection against reverse polarity. A dual power supply circuit automatically activates a backup accumulator, if the main power source fails. The device is protected from drops, shocks and vibrations (МЭК-60068/ IEC 60068), voltage spikes, static discharges and impulse interference (EN-55022, EN-61000-4, FCC). Mean time between failures (MTBF) - 3.5 centuries. EDS-205A-MM-SC-T operates in two communication modes, supports most of the modern protocols, provides hardware and software protection. Its optical ports will keep even the most remote network segments always connected. The device can be applied at any facility wh ere it is required to construct a high speed scalable and flexible industrial network segment.

Unmanaged switch EDS-205A-M-SC is the most robust model among the product line. The industrial grade metal chassis with protection according to IP 30 houses 4 high speed Ethernet ports of 10/100 Base TX standard and 1 port of 100 BaseFX standard to transfer data over single-mode optical fiber at the distance of up to 40 km. The electronic components and redundant dual power supply circuit secure the device stable operation at extreme temperatures ranged fr om -40 to +75 °C. Network switch EDS-205A-M-SC-T: description and features: Store and Forward switching method allows frame transfer only after error checking is complete, thus, contributing to the device reliability. The large MAC address table (1 K) increases the network determination. 802.3u standard ensures operation at the rate of up to 100 Mbit/s and provides auto negotiation with previous protocol versions. 802.3x Flow Control standard secures the support of full-duplex communication and compatibility with DIX. Voltage: DC — from 9.6 to 60 V, AC — from 18 to 30 V. EDS-205A manufactured by MOXA consumes 2.4 W (0.1 at 24 V) only. There is protection against reverse polarity. A dual power supply circuit automatically activates a backup accumulator, if the main power source fails. The device is protected from drops, shocks and vibrations (МЭК-60068/ IEC 60068), voltage spikes, static discharges and impulse interference (EN-55022, EN-61000-4, FCC). Mean time between failures (MTBF) - 3.5 centuries. EDS-205A-MM-SC-T operates in two communication modes, supports most of the modern protocols, provides hardware and software protection. Its optical ports will keep even the most remote network segments always connected. The device can be applied at any facility wh ere it is required to construct a high speed scalable and flexible industrial network segment.