AVD21WP
The IPC2U AVD21WP is a 21.5-inch industrial touch monitor with a 1920 × 1080 IPS panel at 400 cd/m², projected capacitive (P-Cap) multi-touch and an IP65-rated front bezel — built for HMI and SCADA workstations on factory floors, in washdown zones and in outdoor-facing enclosures where commercial monitors fail.
Four video inputs — VGA, DVI-D, HDMI and DisplayPort — stay connected simultaneously with OSD source switching, so one monitor serves a SCADA PC and a legacy controller without rewiring. The 12–36 V DC input (terminal block + DC jack) connects directly to 24 V panel supplies; VESA 75/100 and a 12-hole panel-mount pattern cover arm, wall and flush-panel installation.
Key Features
- 21.5″ FHD IPS, 400 cd/m²: Readable under factory lighting with wide viewing angles; 102 ppi renders SCADA trends and alarm lists clearly at operator distance.
- P-Cap multi-touch glass front: Smartphone-class gesture response (pinch, swipe), glove-adjustable sensitivity, and a smooth surface that survives repeated disinfectant wipe-downs without calibration drift.
- IP65 front bezel: Dust-tight and jet-water protected — suited to food-processing splash zones, washdown areas and dusty production floors.
- 4 simultaneous video inputs: VGA, DVI-D, HDMI, DisplayPort with OSD switching — replaces a KVM switch in multi-source operator stations.
- 12–36 V DC direct input: Terminal block for hard-wiring plus DC jack; polarity protection included; no AC inverter needed in DC panels.
- VESA 75/100 + 12-point panel mount: One SKU covers arm-mount, wall-bracket and flush panel cut-out installations.
- Fanless aluminium chassis: Rigid, heat-dissipating construction for continuous 24/7 duty without moving parts.
Specification Overview
| Parameter | Specification |
|---|---|
| Display | 21.5″ IPS, 1920 × 1080, 400 cd/m² |
| Touch | Projected capacitive (P-Cap) multi-touch |
| Front protection | IP65 |
| Video inputs | VGA, DVI-D, HDMI, DisplayPort |
| Touch interface | USB Type-A |
| Power | 12–36 V DC (terminal block + DC jack) |
| Mounting | VESA 75/100, 12-point panel mount |
| Chassis | Aluminium, fanless |
Application Use Cases
Factory Floor SCADA/HMI Workstation
The 400 cd/m² panel and P-Cap touch handle shift-long alarm management and data entry under factory lighting; the IP65 bezel resists dust and splash, and the four inputs give operators access to primary and secondary controllers from one screen.
Machine Builder Panel Integration
The 12-hole panel-mount pattern, IP65 front and direct 24 V input let machine builders flush-mount the AVD21WP into enclosure doors — one monitor SKU covering multiple machine designs across a product family.
Outdoor and Semi-Outdoor Enclosures
The IP65 seal, aluminium chassis and 12–36 V input (compatible with solar-charged battery systems) suit kiosks, loading-dock stations and equipment enclosures without a custom display housing.
Food, Beverage and Pharma Production
The seamless glass front wipes down with alcohol and disinfectants, eliminating the bezel crevices where contamination accumulates — while the 24 V DC input matches standard processing-line supply voltage.
Why Choose the AVD21WP
Four inputs replace a KVM. SCADA PC, PLC programmer, camera controller and video recorder all stay connected, with OSD source selection — less wiring, no KVM hardware, no daily cable swapping.
Direct DC input removes the inverter. Commercial monitors need 230 V AC; the AVD21WP feeds from the same 24 V DIN-rail supply as the PLC — a saving that multiplies across installations with many display panels.
IP65 where it matters. The front bezel — the surface exposed to the process — carries the IP65 seal, while a standard rear (protected inside the enclosure in panel installations) keeps the price below fully sealed displays.
Frequently Asked Questions
What touch technology does the AVD21WP use?
Projected capacitive (P-Cap) multi-touch with a glass front — supporting gestures, light-glove operation and repeated wet-wipe cleaning without the wear that degrades resistive touch membranes.
What video inputs are provided?
Four simultaneous inputs: VGA (DB15), DVI-D, HDMI and DisplayPort, with active-source selection via the OSD menu or front-panel buttons.
What power supply does it need?
12–36 V DC via terminal block or DC barrel jack, with polarity protection. No external AC adapter is required for 12/24/36 V industrial or vehicle power systems.
What mounting options are available?
VESA 75 × 75 mm and 100 × 100 mm patterns for arms and brackets, plus 12 panel-mount holes on the bezel perimeter for flush cut-out installation in enclosure doors.
Is the AVD21WP IP65-rated on all sides?
The IP65 rating applies to the front bezel — the surface exposed in a panel-mount installation. The rear is standard industrial construction and should sit inside the enclosure; for all-round exposure, use a sealed housing.
The IPC2U AVD21WP is a 21.5-inch industrial touch monitor with a 1920 × 1080 IPS panel at 400 cd/m², projected capacitive (P-Cap) multi-touch and an IP65-rated front bezel — built for HMI and SCADA workstations on factory floors, in washdown zones and in outdoor-facing enclosures where commercial monitors fail.
Four video inputs — VGA, DVI-D, HDMI and DisplayPort — stay connected simultaneously with OSD source switching, so one monitor serves a SCADA PC and a legacy controller without rewiring. The 12–36 V DC input (terminal block + DC jack) connects directly to 24 V panel supplies; VESA 75/100 and a 12-hole panel-mount pattern cover arm, wall and flush-panel installation.
Key Features
- 21.5″ FHD IPS, 400 cd/m²: Readable under factory lighting with wide viewing angles; 102 ppi renders SCADA trends and alarm lists clearly at operator distance.
- P-Cap multi-touch glass front: Smartphone-class gesture response (pinch, swipe), glove-adjustable sensitivity, and a smooth surface that survives repeated disinfectant wipe-downs without calibration drift.
- IP65 front bezel: Dust-tight and jet-water protected — suited to food-processing splash zones, washdown areas and dusty production floors.
- 4 simultaneous video inputs: VGA, DVI-D, HDMI, DisplayPort with OSD switching — replaces a KVM switch in multi-source operator stations.
- 12–36 V DC direct input: Terminal block for hard-wiring plus DC jack; polarity protection included; no AC inverter needed in DC panels.
- VESA 75/100 + 12-point panel mount: One SKU covers arm-mount, wall-bracket and flush panel cut-out installations.
- Fanless aluminium chassis: Rigid, heat-dissipating construction for continuous 24/7 duty without moving parts.
Specification Overview
| Parameter | Specification |
|---|---|
| Display | 21.5″ IPS, 1920 × 1080, 400 cd/m² |
| Touch | Projected capacitive (P-Cap) multi-touch |
| Front protection | IP65 |
| Video inputs | VGA, DVI-D, HDMI, DisplayPort |
| Touch interface | USB Type-A |
| Power | 12–36 V DC (terminal block + DC jack) |
| Mounting | VESA 75/100, 12-point panel mount |
| Chassis | Aluminium, fanless |
Application Use Cases
Factory Floor SCADA/HMI Workstation
The 400 cd/m² panel and P-Cap touch handle shift-long alarm management and data entry under factory lighting; the IP65 bezel resists dust and splash, and the four inputs give operators access to primary and secondary controllers from one screen.
Machine Builder Panel Integration
The 12-hole panel-mount pattern, IP65 front and direct 24 V input let machine builders flush-mount the AVD21WP into enclosure doors — one monitor SKU covering multiple machine designs across a product family.
Outdoor and Semi-Outdoor Enclosures
The IP65 seal, aluminium chassis and 12–36 V input (compatible with solar-charged battery systems) suit kiosks, loading-dock stations and equipment enclosures without a custom display housing.
Food, Beverage and Pharma Production
The seamless glass front wipes down with alcohol and disinfectants, eliminating the bezel crevices where contamination accumulates — while the 24 V DC input matches standard processing-line supply voltage.
Why Choose the AVD21WP
Four inputs replace a KVM. SCADA PC, PLC programmer, camera controller and video recorder all stay connected, with OSD source selection — less wiring, no KVM hardware, no daily cable swapping.
Direct DC input removes the inverter. Commercial monitors need 230 V AC; the AVD21WP feeds from the same 24 V DIN-rail supply as the PLC — a saving that multiplies across installations with many display panels.
IP65 where it matters. The front bezel — the surface exposed to the process — carries the IP65 seal, while a standard rear (protected inside the enclosure in panel installations) keeps the price below fully sealed displays.
Frequently Asked Questions
What touch technology does the AVD21WP use?
Projected capacitive (P-Cap) multi-touch with a glass front — supporting gestures, light-glove operation and repeated wet-wipe cleaning without the wear that degrades resistive touch membranes.
What video inputs are provided?
Four simultaneous inputs: VGA (DB15), DVI-D, HDMI and DisplayPort, with active-source selection via the OSD menu or front-panel buttons.
What power supply does it need?
12–36 V DC via terminal block or DC barrel jack, with polarity protection. No external AC adapter is required for 12/24/36 V industrial or vehicle power systems.
What mounting options are available?
VESA 75 × 75 mm and 100 × 100 mm patterns for arms and brackets, plus 12 panel-mount holes on the bezel perimeter for flush cut-out installation in enclosure doors.
Is the AVD21WP IP65-rated on all sides?
The IP65 rating applies to the front bezel — the surface exposed in a panel-mount installation. The rear is standard industrial construction and should sit inside the enclosure; for all-round exposure, use a sealed housing.
Get a Quote
