PDX3-090T-8A: A Rugged Fanless 9" Industrial Touch Panel PC with IP65-Rated Front Panel

Industrial HMI deployments demand hardware that can operate continuously in environments where temperature swings, dust, vibration, and moisture are everyday realities — not edge cases. The PDX3-090T-8A from ICOP Technology is a compact, fanless 9" touch panel PC built precisely for these conditions, combining a low-power x86 SoC, IP65-rated front panel, wide-range DC input, and a full industrial I/O set for direct integration into factory floors, control cabinets, and transportation systems. It is available at ipc2u.com.

PDX3-090T-8A — Key Specifications at a Glance

PDX3-090T-8A — Fanless Panel PC for Continuous Industrial Operation

ICOP PDX3-090T-8A — Fanless 9" Industrial Touch Panel PC with IP65 Front Panel Protection

The PDX3-090T-8A is a purpose-built industrial panel PC designed for 24/7 continuous operation in environments that would compromise consumer or commercial-grade hardware. It is powered by the DM&P Vortex86DX3 SoC running at 1 GHz — a fully x86-compatible processor engineered for long-lifecycle embedded deployments. The fanless thermal design eliminates rotating parts entirely, removing the most common single point of failure in panel computers and making the unit suitable for dusty, greasy, or chemically contaminated industrial air. With 1 GB or 2 GB of onboard DDR3 memory and CompactFlash-based storage, the platform is optimized for deterministic, low-overhead control tasks where stability over years of runtime matters more than peak throughput.

The 9" TFT LCD panel delivers a 1024 × 600 resolution at 300 nits standard brightness, with a 500:1 contrast ratio and wide viewing angles of 140° horizontal and 120° vertical — practical figures for operator panels mounted at varying heights in control cabinets or on machinery. An optional high-brightness 600 nit configuration is available for installations with strong ambient lighting. The front panel carries an IP65 ingress protection rating, meaning it is sealed against dust particles and protected against water jets from any direction — a necessary baseline for washdown environments, food processing areas, or outdoor-facing enclosures. Touchscreen input is available in two configurations: standard analog resistive, which operates reliably with gloved hands and styluses, or optional projected capacitive for multi-touch and more responsive modern-HMI workflows.

Industrial connectivity is handled through a combination of a single RS-232/RS-422/RS-485 multi-mode serial port, a 10/100M Ethernet port, and two USB 2.0 ports — covering the communication interfaces that dominate factory-floor and transportation-system deployments where legacy PLCs, barcode scanners, RFID readers, and serial-protocol sensors remain in service. Storage options extend beyond the onboard CompactFlash slot to include an optional MicroSD socket and up to 4 GB of soldered Flash memory, providing flexibility for different OS and data-logging strategies. HD audio output via the Realtek ALC262 CODEC supports audible alarm or voice-guidance functions where required by the application.

The power input accepts DC voltages from +8 V to +35 V, a range wide enough to connect directly to 12 V vehicle systems, 24 V industrial bus supplies, or unregulated battery-backed rails without intermediate DC-DC conversion. Maximum system consumption is 20 W. The standard temperature range covers 0°C to +50°C; the −I variant extends this to −20°C to +60°C for outdoor or unheated enclosure deployments. The full product family covers eight SKUs, combining the choice of 1 GB or 2 GB RAM, resistive or capacitive touch, and standard or extended temperature range, while all variants share the same mechanical footprint (236.6 × 146 × 35 mm) and the same panel-mount and optional VESA mounting interface. CE, FCC, and VCCI certifications, along with shock and vibration testing, support compliance-driven procurement processes.

Order Variants: Matching the Right Configuration to Your Application