EDS-G205-1GTXSFP

Switch EDS-G205-1GTXSFP. Industrial switch EDS-G205-1GTXSFP by MOXA houses 4 Gigabit Ethernet ports of 10/100/1000 Base TX standard with RJ-45 slots and one combo-port (RJ-45 or SFP) to transmit a signal over a fiber optical cable. Such configuration makes this switch perfect low-budget choice for designing industrial networks that have special requirements regarding speed and throughput. The device is equipped a system of DIP switches, a redundant power supply circuit and a relay output for communication with engineers in emergency cases. 5-Port Ethernet switch EDS-G205-1GTXSFP: description and features: IEEE 802.3ab and 802.3z standards support most protocols of Gigabit communication: 1000 Base TX/SX/LX/LHX/ZX. Optical port allows expanding the data transmission distance and improving interference immunity. 802.3Az standard uses a power efficient mode: power consumption is reduced at the time of low network activity. MAC address table has been expanded up to 8000, packet buffer size has been enlarged up to 1024 Kbit. This facilitates traffic localization, prevents data loss, ensures low latency (delay). The built-in DIP switches (4-pin) allow you to choose a speed mode (100/1000 SFP), to activate power efficiency function, broadcast storm protection, and Jumbo Frame (10 KB). The discrete output relay channel (1 A at 24 W) promptly informs engineers about power failures or connection disruptions. Input voltage range has been expanded: 9.6…60 V. There is a redundant input provided. The device is characterized by great power efficiency and consumes 3.84 W only (160 mA at 24 V). Mean time between failures (MTBF) is over 3 centuries. Hence, the unmanaged Gigabit switch EDS-G205-1GTXSFP is a compact and economically efficient solution for deployment of high speed industrial networks. The installation shall not take you much time (Plug-and-Play), whereas the elaborate system of DIP switches significantly simplifies configuration on place regarding particular tasks of an automation system.

Switch EDS-G205-1GTXSFP. Industrial switch EDS-G205-1GTXSFP by MOXA houses 4 Gigabit Ethernet ports of 10/100/1000 Base TX standard with RJ-45 slots and one combo-port (RJ-45 or SFP) to transmit a signal over a fiber optical cable. Such configuration makes this switch perfect low-budget choice for designing industrial networks that have special requirements regarding speed and throughput. The device is equipped a system of DIP switches, a redundant power supply circuit and a relay output for communication with engineers in emergency cases. 5-Port Ethernet switch EDS-G205-1GTXSFP: description and features: IEEE 802.3ab and 802.3z standards support most protocols of Gigabit communication: 1000 Base TX/SX/LX/LHX/ZX. Optical port allows expanding the data transmission distance and improving interference immunity. 802.3Az standard uses a power efficient mode: power consumption is reduced at the time of low network activity. MAC address table has been expanded up to 8000, packet buffer size has been enlarged up to 1024 Kbit. This facilitates traffic localization, prevents data loss, ensures low latency (delay). The built-in DIP switches (4-pin) allow you to choose a speed mode (100/1000 SFP), to activate power efficiency function, broadcast storm protection, and Jumbo Frame (10 KB). The discrete output relay channel (1 A at 24 W) promptly informs engineers about power failures or connection disruptions. Input voltage range has been expanded: 9.6…60 V. There is a redundant input provided. The device is characterized by great power efficiency and consumes 3.84 W only (160 mA at 24 V). Mean time between failures (MTBF) is over 3 centuries. Hence, the unmanaged Gigabit switch EDS-G205-1GTXSFP is a compact and economically efficient solution for deployment of high speed industrial networks. The installation shall not take you much time (Plug-and-Play), whereas the elaborate system of DIP switches significantly simplifies configuration on place regarding particular tasks of an automation system.