NPort converters of 5100A series are the improved version of the previous NPort 5100 version and provide several considerable advantages:
- The number of elements of a printed board is reduced by 20%
- Power consumption is reduced by 50%, down to 1W
- Surge protection of Ethernet lines, a serial line and power lines
- Configuration over a web interface in 3 steps
- Support of UDP multicast data transmission
- COM-grouping function
- Increased operation speed of COM ports of up to 921.6 kbps
- Increased operating temperature range from from +55 to +60С
- a screw-retained power connector
NPort converters of 5100A series are the improved version of the previous NPort 5100 version and provide several considerable advantages:
- The number of elements of a printed board is reduced by 20%
- Power consumption is reduced by 50%, down to 1W
- Surge protection of Ethernet lines, a serial line and power lines
- Configuration over a web interface in 3 steps
- Support of UDP multicast data transmission
- COM-grouping function
- Increased operation speed of COM ports of up to 921.6 kbps
- Increased operating temperature range from from +55 to +60С
- a screw-retained power connector
Power consumption is reduced by 50%
Moxa MiiNe is a compact but powerful ARM SoC designed specially to convert a serial interface to Ethernet with embedded RAM and flash memory. Thanks to MiiNe processor from MOXA, NPort 5110A series is the only serial interface server in the world with power consumption of less than 1 W. Compared to the solutions existing on the market, NPort 5100A consumes 50% less power.
Surge protection of Ethernet lines, a serial line and power lines
Surges are high amplitude impulses caused by transient processes when switching on and lightning discharges that are a common threat to all electric devices. In NPort 5000A converters, there is surge protection of a serial line, Ethernet and power input in accordance with IEC 61000-4-5.
Configuration over a web interface in 3 steps
The user-friendly easy-to-use web interface of NPort 5100A allows to prepare a device for work in 3 step. To complete configuration, a user requires about 30 seconds, on average.
Power efficient processor MiiNe
Power efficient processor MiiNe of Moxa in-house development and production is designed for 1- and 2-port converters
- 32-bit ARM core
- Uses UART technology from Moxa
- Features embedded 2Mb flash memory and 4Mb SDRAM
- Low power consumption
NPort 5100A / NPort 5200A:
- Serial line protection: Level 1 (0.5kV)
- Ethernet line protection: Level 2 (1kV)
- Power input protection: Level 3 (2kV)
NPort IA5150A / NPort IA5250A / NPort IA5450A:
- Serial line protection: Level 2 (1kV)
- Ethernet line protection: Level 2 (1kV)
- Power input protection: Level 3 (2kV)
*all NPort series use MiiNe processors, excluding NPort of IA5450 series