MGate EIP3170I

Protocol converter MGate EIP3170I provides simple integration of DF1 devices into Ethernet/IP network. Thanks to the support of PCCC objects for Rockwell Automation networks, the converter interacts with various SCADA systems (RSLinx). Intelligent functions allow solving typical problems that arise when connecting serial devices with outdated software. The device houses an RS-232/422 COM-port and 2 10/100 Base TX LAN ports with one IP address and opportunity for cascading. Network gateway MGate EIP3170I by MOXA: description and features: Isolation of Ethernet ports– 1.5 kV, COM-port - 2 kV. The technology of contactless galvanic isolation prevents the risk of current leakage, chain damage and communication disruptions. ESD Protection: 15 kV. COM-port rate: 1200 bit/s…921.6 Kbit/s. There are built-in pull high/low resistors for resistance nomination. ProCOM allows using virtual COM-ports for remote access. The maximum number of simultaneously connected Ethernet/IP devices: 16 (8 'client-server' pairs). Smart Routing controls routing by IP address, TCP port number or ID. The cascading joins gateways, i.e. there is no need for independent switches. Serial Redirector allows data redirection, thus, providing parallel access to slaves for Serial and Ethernet Masters. Configuration options: Serial, Telnet, Windows. The built-in protocol traffic analyzer defines causes of failures. The special utility logs all evens and records commands and responses. The device is provided in a fanless housing with a redundant power input that is protected from vibrations (IEC 60068-2-6), voltage spikes, impulse interference (EN 55022/24, FCC 15B, EN 61000-4). Dimensions: 29х89х119. Mean time between failures (MTBF) — 24 years. MGate EIP3170I converter is a great solution for construction of fail-safe automated control systems on the basis of DF1 devices. The dual Ethernet ports, innovative functions, high level of protection and affordable price support the statement above. The industrial certificates confirm the device safe operation in harsh industrial conditions: C1D2, ATEX Zone 2.

Protocol converter MGate EIP3170I provides simple integration of DF1 devices into Ethernet/IP network. Thanks to the support of PCCC objects for Rockwell Automation networks, the converter interacts with various SCADA systems (RSLinx). Intelligent functions allow solving typical problems that arise when connecting serial devices with outdated software. The device houses an RS-232/422 COM-port and 2 10/100 Base TX LAN ports with one IP address and opportunity for cascading. Network gateway MGate EIP3170I by MOXA: description and features: Isolation of Ethernet ports– 1.5 kV, COM-port - 2 kV. The technology of contactless galvanic isolation prevents the risk of current leakage, chain damage and communication disruptions. ESD Protection: 15 kV. COM-port rate: 1200 bit/s…921.6 Kbit/s. There are built-in pull high/low resistors for resistance nomination. ProCOM allows using virtual COM-ports for remote access. The maximum number of simultaneously connected Ethernet/IP devices: 16 (8 'client-server' pairs). Smart Routing controls routing by IP address, TCP port number or ID. The cascading joins gateways, i.e. there is no need for independent switches. Serial Redirector allows data redirection, thus, providing parallel access to slaves for Serial and Ethernet Masters. Configuration options: Serial, Telnet, Windows. The built-in protocol traffic analyzer defines causes of failures. The special utility logs all evens and records commands and responses. The device is provided in a fanless housing with a redundant power input that is protected from vibrations (IEC 60068-2-6), voltage spikes, impulse interference (EN 55022/24, FCC 15B, EN 61000-4). Dimensions: 29х89х119. Mean time between failures (MTBF) — 24 years. MGate EIP3170I converter is a great solution for construction of fail-safe automated control systems on the basis of DF1 devices. The dual Ethernet ports, innovative functions, high level of protection and affordable price support the statement above. The industrial certificates confirm the device safe operation in harsh industrial conditions: C1D2, ATEX Zone 2.