MGate 4101-MB-PBS
MOXA
SKU: 66171000
1-port Modbus to PROFIBUS Slave gateway, 12-48VDC, 0...60C
Price on request
Available on order
Available on order
MGate 4101-MB-PBS
Converter MGate 4101-MB-PBS. The industrial gateway MGate 4101-MB-PBS designed by MOXA acts as a communication portal between PROFIBUS programmable logic controllers (e.g. Siemens S300, S400) and Modbus RTU/ASCII devices. Operation modes: in PROFIBUS network — DP-V0 Slave, in Modbus network — Master/Slave. The device uses the patented QuikLink technology of quick setup and convenient diagnostics tools. The model features the industrial grade design; it is equipped with a dual power input and a relay output for alarm notifications. Protocol converter MGate 4101-MB-PBS: description and features: PROFIBUS interface supports rates from 9.6 Kbit/s up to 12 Mbit/s, is provided with a DB9F slot and a rotating address switch. Modbus interface conforms to RS-232/422/485 standard requirements (rate from 50 bit/s up to 921.6 Kbit/s), it is equipped with a DB9M slot and pull high/low resistors. Automatic Data Direction Control. The unique QuickLink technology with Auto Mapping and Auto Learning functions allows configuring just in few minutes via a serial console. Powerful and well visualized tools save Modbus communication logs and assist in troubleshooting. Input voltage: 12…48 V DC. Power supply redundancy ensures uninterruptible operation even if the main source fails. The relay output promptly informs engineers about the problems. The fanless metal housing of compact dimensions (36х105х140) protects the electronic components from drops, vibrations and shocks: IEC 60068-2-6/27/32. Mounting option: DIN-rail mount. Mean time between failures (MTBF) — around 60 years, which conditions the reasonable price. In comparison to the traditional mapping of input-output paths that can take up to several hours or days in case of complex systems, the MOXA’s adapter MGate 4101-MB-PBS is capable of performing this task in several minutes and then connecting Modbus devices to the PROFIBUS network. The gateway is well protected from mechanical damage, voltage surge, impulse interference, and is adapted to safe operation in harsh industrial environment.
MGate 4101-MB-PBS
Converter MGate 4101-MB-PBS. The industrial gateway MGate 4101-MB-PBS designed by MOXA acts as a communication portal between PROFIBUS programmable logic controllers (e.g. Siemens S300, S400) and Modbus RTU/ASCII devices. Operation modes: in PROFIBUS network — DP-V0 Slave, in Modbus network — Master/Slave. The device uses the patented QuikLink technology of quick setup and convenient diagnostics tools. The model features the industrial grade design; it is equipped with a dual power input and a relay output for alarm notifications. Protocol converter MGate 4101-MB-PBS: description and features: PROFIBUS interface supports rates from 9.6 Kbit/s up to 12 Mbit/s, is provided with a DB9F slot and a rotating address switch. Modbus interface conforms to RS-232/422/485 standard requirements (rate from 50 bit/s up to 921.6 Kbit/s), it is equipped with a DB9M slot and pull high/low resistors. Automatic Data Direction Control. The unique QuickLink technology with Auto Mapping and Auto Learning functions allows configuring just in few minutes via a serial console. Powerful and well visualized tools save Modbus communication logs and assist in troubleshooting. Input voltage: 12…48 V DC. Power supply redundancy ensures uninterruptible operation even if the main source fails. The relay output promptly informs engineers about the problems. The fanless metal housing of compact dimensions (36х105х140) protects the electronic components from drops, vibrations and shocks: IEC 60068-2-6/27/32. Mounting option: DIN-rail mount. Mean time between failures (MTBF) — around 60 years, which conditions the reasonable price. In comparison to the traditional mapping of input-output paths that can take up to several hours or days in case of complex systems, the MOXA’s adapter MGate 4101-MB-PBS is capable of performing this task in several minutes and then connecting Modbus devices to the PROFIBUS network. The gateway is well protected from mechanical damage, voltage surge, impulse interference, and is adapted to safe operation in harsh industrial environment.
Interfaces
COM Total
2
RS-232/422/485
1
Industrial Interfaces
Profibus DP Version
1
Supported Protocols
Industrial Protocols
Modbus RTU master, Modbus RTU slave, Modbus ASCII master, Modbus ASCII slave, Profibus slave
LED / Controls
LED
READY LED, TX LED, RX LED, PWR1, PWR2, PROFIBUS Status LED
Setup of Operation Mode
Console Port, By Switches
Controls
1xReset
System Power Input
Redundant power input
Yes
Input Voltage DC
12..48 V
Power Supply Reserve input Voltage DC
12..48 V
Operating Conditions
Operating Temperature
0..60 °C
Construction
Construction Chassis
Metal Chassis
Mounting Configuration
DIN-Rail mount, Wall
Protection Level of Chassis
IP30
Dimensions and weight
Width
36 mm
Depth
140 mm
Height
105 mm
Connectors
Connectors
Console Port RS-232 (RJ-45), DC input (terminal block)
Standards and Certifications
Certifications
CE, FCC
EMI
EN 55022, FCC Part 15
EMS
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 55024
Freefall
IEC 60068-2-32
Safety
UL 60950-1, EN 60950-1
Vibration And Shock
IEC 60068-2-6, IEC 60068-2-27
Dimensions
Gross Weight
0.75 kg
Interfaces
COM Total
2
RS-232/422/485
1
Industrial Interfaces
Profibus DP Version
1
Supported Protocols
Industrial Protocols
Modbus RTU master, Modbus RTU slave, Modbus ASCII master, Modbus ASCII slave, Profibus slave
LED / Controls
LED
READY LED, TX LED, RX LED, PWR1, PWR2, PROFIBUS Status LED
Setup of Operation Mode
Console Port, By Switches
Controls
1xReset
System Power Input
Redundant power input
Yes
Input Voltage DC
12..48 V
Power Supply Reserve input Voltage DC
12..48 V
Operating Conditions
Operating Temperature
0..60 °C
Construction
Construction Chassis
Metal Chassis
Mounting Configuration
DIN-Rail mount, Wall
Protection Level of Chassis
IP30
Dimensions and weight
Width
36 mm
Depth
140 mm
Height
105 mm
Connectors
Connectors
Console Port RS-232 (RJ-45), DC input (terminal block)
Standards and Certifications
Certifications
CE, FCC
EMI
EN 55022, FCC Part 15
EMS
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 55024
Freefall
IEC 60068-2-32
Safety
UL 60950-1, EN 60950-1
Vibration And Shock
IEC 60068-2-6, IEC 60068-2-27
Dimensions
Gross Weight
0.75 kg
Interfaces
COM Total
2
RS-232/422/485
1
Industrial Interfaces
Profibus DP Version
1
Supported Protocols
Industrial Protocols
Modbus RTU master, Modbus RTU slave, Modbus ASCII master, Modbus ASCII slave, Profibus slave
LED / Controls
LED
READY LED, TX LED, RX LED, PWR1, PWR2, PROFIBUS Status LED
Setup of Operation Mode
Console Port, By Switches
Controls
1xReset
System Power Input
Redundant power input
Yes
Input Voltage DC
12..48 V
Power Supply Reserve input Voltage DC
12..48 V
Operating Conditions
Operating Temperature
0..60 °C
Construction
Construction Chassis
Metal Chassis
Mounting Configuration
DIN-Rail mount, Wall
Protection Level of Chassis
IP30
Dimensions and weight
Width
36 mm
Depth
140 mm
Height
105 mm
Connectors
Connectors
Console Port RS-232 (RJ-45), DC input (terminal block)
Standards and Certifications
Certifications
CE, FCC
EMI
EN 55022, FCC Part 15
EMS
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 55024
Freefall
IEC 60068-2-32
Safety
UL 60950-1, EN 60950-1
Vibration And Shock
IEC 60068-2-6, IEC 60068-2-27
Dimensions
Gross Weight
0.75 kg
Interfaces
COM Total
2
RS-232/422/485
1
Industrial Interfaces
Profibus DP Version
1
Supported Protocols
Industrial Protocols
Modbus RTU master, Modbus RTU slave, Modbus ASCII master, Modbus ASCII slave, Profibus slave
LED / Controls
LED
READY LED, TX LED, RX LED, PWR1, PWR2, PROFIBUS Status LED
Setup of Operation Mode
Console Port, By Switches
Controls
1xReset
System Power Input
Redundant power input
Yes
Input Voltage DC
12..48 V
Power Supply Reserve input Voltage DC
12..48 V
Operating Conditions
Operating Temperature
0..60 °C
Construction
Construction Chassis
Metal Chassis
Mounting Configuration
DIN-Rail mount, Wall
Protection Level of Chassis
IP30
Dimensions and weight
Width
36 mm
Depth
140 mm
Height
105 mm
Connectors
Connectors
Console Port RS-232 (RJ-45), DC input (terminal block)
Standards and Certifications
Certifications
CE, FCC
EMI
EN 55022, FCC Part 15
EMS
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 55024
Freefall
IEC 60068-2-32
Safety
UL 60950-1, EN 60950-1
Vibration And Shock
IEC 60068-2-6, IEC 60068-2-27
Dimensions
Gross Weight
0.75 kg