ICP DAS company presents a new Modbus gateway GW-7828, which allows the user to read data from 100 M-Bus devices and convert them to Modbus RTU protocol.
Modbus RTU read commands 0x03 and 0x04 supported, as well as the M-Bus standard: EN-13757 and CJ / T-188.
Key features:
- M-Bus support: EN-13757, CJ/T-188
- Modbus RTU read commands 0x03 and 0x04 support
- Connecting up to 100 M-Bus Slave devices
- 1xRS-232/422/485 universal port
- СОМ baud rate 300 to 115200 bps
- M-Bus baud rate 300 to 2400 bps
- Power consumption 1.8W at 24V DC with 1xM-Bus Slave
- Power consumption 11.8W at 24V DC with 100xM-Bus Slave
- Dimensions 72x122x33 mm
- Operating temperature -25 to +60oC
It should be noted that the gateway was tested for compatibility and supports various devices, such as:
- Danfoss SONOMETER 500
- SENSUS 405S
- WESER PUL
- DIEHL ALTAIR V4
- Wason LXZD-Y3
The gateway is configured through the free MBus Utility:
Also, ICP DAS previously released I-7590 converter of RS-232/422/485 interface to M-Bus Master, allowing a PC to poll M-Bus devices via the COM port.
