ICP-DAS expands the line of input/output boards with two new models: PCI-D96SU and PCI-D128SU.
Universal PCI bus boards are universal and support the power of 3.3 V/5 V. They can be installed into either PCI-X, or PCI slot.
Boards are provided with 96 or 128 programmable digital input/output channels with either 3 or 4 ports with 32-bit bandwidth. Each channel can be configured as Digital Input or Digital Output.
Various input and output voltage values can be configured: +1.8 V, +2.5 V, +3.3 V and +5 V.
The boards feature DIP switches that can set the board id within a system if two or more boards are installed at the same computer.
There are pull-up resistors on the board. The required pull-up resistor can be chosen using jumpers. The digital input status can be set either to 0, or to 1; if digital input channels are unconnected, the status will remain in either 1 or 0 position.
Female SCSI II 100-pin high-density connector reduces the board area inside a computer. It can be connected directly to DN-100 or other daughter boards.
Boards are compatible with Windows 10/8/7/2008/2003/XP 32/64-bit and even DOS.
There are sample programs on the languages as follows:
- .NET
- Microsoft Visual C#.NET 2005
- Microsoft Visual Basic.NET 2005
- Turbo C++, Borland C++, Microsoft C++
- Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic and LabVIEW
Features
- Support of +3.3/+5 V power from PCI bus
- 96/128 channels Digital I/O
- Bi-direction programmable I/O ports under software control
- 3 or 4 bi-direction 32-bit I/O ports
- DIO operating voltage: +1.8 V, +2.5 V, +3.3 V, +5 V
- Pull-high/low jumpers for DI channels
- Digital pattern/signal generator for DO channels
- Pattern-matching and interrupt monitoring function
- Card ID setting function using DIP switches
- SCSI II 100-pin connector
There are several connectors on the board:
CON1 - main SCSI II Female 100-pin connector.
CN1 and CN2 – IDC-20 Male connectors, provided only in PCU-D128SU.
To connect PCI board to DN-100 daughter board, use special CA-SCSI100-15 cable with SCSI II Male connectors.
There are cables of various length to connect PCI to different daughter boards: DN-20, DB-24POR, DB-24C Cables: CA-2002, CA-2010, CA-2020.
