https://ipc2u.com/catalog/industrial-communication/ethernet-switch/power-generation-and-distribution-applications-iec-61850-3/
15:05 21.04.2021
Industrial IEC 61850-3 Ethernet Switches
This group of Industrial grade Gigabit Ethernet Managed Switches are designed to meet demands of substations and power stations and are fully compliant with IEC 61850-3 and IEEE 1613 requirements. Housed in rugged DIN rail or wall mountable enclosure with extended operating temperature range of -40°C to +85°C this switch is also suitable for any other harsh environments. They may be used for building trusted communication between PLC/Relay Protection Units and SCADA to provide:
• data acquisition from PLC/Relay Protection Units, digital sensors and further transmission to SCADA (MMS IEC61850 protocol),
• switchgear control commands sending from SCADA to PLC/Relay Protection Units (MMS IEC61850 protocol),
• fast data transmission between PLC/Relay Protection Units (GOOSE protocol),
• video signal sending to control room from cameras to check the switching operations of circuit breakers, disconnectors and earth switches at the switch yards.
Gigabit Ethernet module with 2 10/100/1000BaseT(X) or 100/1000BaseSFP slot combo ports
Industrial Rackmount Ethernet switch, 8 10/100BaseT(X) ports, up to 2 Gigabit ports, front cabling, 88...300 VDC or 85...264VAC power input, -40...85°C
IEC 61850-3 managed Rackmount Ethernet Switch system with 1 slot for fast Ethernet module, for a total of up to 28 ports, cabling on front panel, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85C operating temperature
Interface module, 2 combo 10/100/1000BaseT(X) / SFP (mini-GBIC) ports
Gigabit Ethernet module with 4 10/100/1000BaseT(X) or 100/1000BaseSFP slot combo ports
Industrial Rackmount Ethernet switch, 8 10/100BaseT(X) ports, up to 2 Gigabit ports, down cabling, 88...300 VDC or 85...264VAC power input, -40...85°C
IEC 61850-3 managed Rackmount Ethernet Switch system with 1 slot for fast Ethernet module, for a total of up to 28 ports, cabling on front panel, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85C operating temperature
Interface module, 4 combo 10/100/1000BaseT(X) / SFP (mini-GBIC) ports
IEC 61850-3 managed Rackmount Ethernet Switch system with 1 slot for fast Ethernet module, for a total of up to 28 ports, cabling on front panel, 1 isolated power supply (18-72 VDC), -40 to 85C operating temperature
Interface module, 4 single-mode 100BaseFX ports, SC connectors
«Configure» — This product have more options and can be configured. Please note that some products can not be ordered without mandatory options.
https://ipc2u.com/catalog/industrial-communication/ethernet-switch/power-generation-and-distribution-applications-iec-61850-3/
15:05 21.04.2021