The basis of this tiny form factor board is built upon an 800MHz clocked SoC Vortex86DX2 CPU. The standard version is equipped with 1GB DDR2 RAM memory. Monitors can be connected to the integrated graphics chip both via VGA and via LVDS and supports a resolution of up to 1280x1024 with 16M colours, also, dual monitor operation is possible. The watchdog timer can be programmed with two settings via software and is fully M6117D compatible. The board is equipped with 4MB SPI Flash memory onboard and can be extended with SD-Card or optionally with eMMC 512MB.
For further information and orders please contact our sales team via email firstname.lastname@example.org or via phone: +49 511 807 259-0
The numerous on-board interfaces, such as LAN, audio, two USB ports, three RS-232 and one RS-232/485 COM and internal connectors for almost any peripherals (such as printer, 16-bit GPIO, keyboard, mouse and a JTAG connector for testing and debugging integrated circuits corresponding to IEEE standard 1149.1) make the VDX2-6518-1G-S OEM board, with its just 100mm x 66mm dimensions, an excellent solution for use in industrial embedded applications in very limited space.
The board supports an input voltage of 5 VDC and can be operated in the extended temperature range from -10° to +70 °C without additional processor cooling. IPC2U will be pleased to support you in the development of your embedded solution. Therefore, please request a test and prototyping copy of the VDX2-6518-1G-S for your project.
Besides DOS, WinCE 6.0, WinCE 7.0, Linux, Windows 7 and Windows Embedded Standard (XPE) can be used as operating system.