https://ipc2u.com/news/productnews/pm-bt-series-from-iei-in-pc-104-form-factor/
19:52 12.12.2018
+49 511 807 259-0, sales@ipc2u.com
Cart
Price on request
Discount -
Total:
Favorite products
Call
Authorization
Login:
Password:


Forgot your password? Registration
Forgot your password?
e-Mail::
Forgot your password?
+49 511 807 259-0, sales@ipc2u.com

PM-BT series from IEI in PC/104 form factor

IEI announced the release of a new series of single-board PC/104 computers - PM-BT. The series is based on Intel Atom and Intel Celeron embedded class processors. The computers of the series support the installation of up to 8GB of DDR3L standard memory depending on the installed processor. With intel J1900/E3845/E3825 processors, up to 8GB of memory can be used, while with an intel N2807 processor a maximum memory can be used of 4GB.

The PM-BT series supports dual independent displays via VGA interfaces with a maximum supported resolution of 2560x1600 pixels and a single-channel LVDS interface supporting 18/24 bit graphic panels. The periphery of the PM-BT processor modules includes: three USB2.0 ports, two RS-232/422/485 ports, one Gigabit Ethernet port, a PC/104-Plus expansion bus (supporting PCI and ISA signals), and a full-size mini PCIe slot.

PM-BT series from IEI in PC/104 form factor

Ordering Information

Please contact our sales team

Email: sales@ipc2u.com

or directly

By phone: +49 511 807 259-0

Related products can be found at:
PC/104 CPU Boards and Modules

PM-BT

  • Supports 22nm Intel Atom on-board SoC
  • PC/104-Plus (ISA and PCI signal)
  • 2xCOM, 3xUSB, VGA, LVDS
  • 5V DC In
  • -20 to +70C operating temperature
PM-BT series from IEI in PC/104 form factor

Ordering Information

Please contact our sales team email: sales@ipc2u.com or directly by phone: +49 511 807 259-0

PC/104 CPU Boards and Modules

PM-BT

  • Supports 22nm Intel Atom on-board SoC
  • PC/104-Plus (ISA and PCI signal)
  • 2xCOM, 3xUSB, VGA, LVDS
  • 5V DC In
  • -20 to +70C operating temperature
PM-BT series

All processor modules are equipped with a SATA port for connecting a drive. Optionally, the modules can be equipped with an SSD carrier soldered to the board.

Processor modules of the PM-BT series have an operating temperature in the range from -20 to +70 degrees, which allows using these products to solve a wide range of industrial automation tasks.

The entire PM-BT series are made according to the scheme with passive cooling, has low power consumption, provides the user with a wide range of interfaces and I/O ports with the possibility of expanding the functionality with a small mass and dimensions.

Related articles & news


https://ipc2u.com/news/productnews/pm-bt-series-from-iei-in-pc-104-form-factor/
19:52 12.12.2018