12:28 02.06.2020
+49 511 807 259-0,
Price on request
Discount -
Favorite products

Forgot your password? Registration
Forgot your password?
Forgot your password?
+49 511 807 259-0,

PCI-D96SU/D128SU: 96/128 channel DIO boards

ICP-DAS expands the line of input/output boards with two new models: PCI-D96SU and PCI-D128SU.

Universal PCI bus boards are universal and support the power of 3.3 V/5 V. They can be installed into either PCI-X, or PCI slot.

Boards are provided with 96 or 128 programmable digital input/output channels with either 3 or 4 ports with 32-bit bandwidth. Each channel can be configured as Digital Input or Digital Output.

Various input and output voltage values can be configured: +1.8 V, +2.5 V, +3.3 V and +5 V.

The boards feature DIP switches that can set the board id within a system if two or more boards are installed at the same computer.

There are pull-up resistors on the board. The required pull-up resistor can be chosen using jumpers. The digital input status can be set either to 0, or to 1; if digital input channels are unconnected, the status will remain in either 1 or 0 position.

Female SCSI II 100-pin high-density connector reduces the board area inside a computer. It can be connected directly to DN-100 or other daughter boards.

Boards are compatible with Windows 10/8/7/2008/2003/XP 32/64-bit and even DOS.

There are sample programs on the languages as follows:

  • .NET
  • Microsoft Visual C#.NET 2005
  • Microsoft Visual Basic.NET 2005
  • Turbo C++, Borland C++, Microsoft C++
  • Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic and LabVIEW


  • Support of +3.3/+5 V power from PCI bus
  • 96/128 channels Digital I/O
  • Bi-direction programmable I/O ports under software control
  • 3 or 4 bi-direction 32-bit I/O ports
  • DIO operating voltage: +1.8 V, +2.5 V, +3.3 V, +5 V
  • Pull-high/low jumpers for DI channels
  • Digital pattern/signal generator for DO channels
  • Pattern-matching and interrupt monitoring function
  • Card ID setting function using DIP switches
  • SCSI II 100-pin connector

There are several connectors on the board:

CON1 - main SCSI II Female 100-pin connector.
CN1 and CN2 – IDC-20 Male connectors, provided only in PCU-D128SU.

To connect PCI board to DN-100 daughter board, use special CA-SCSI100-15 cable with SCSI II Male connectors.

There are cables of various length to connect PCI to different daughter boards: DN-20, DB-24POR, DB-24C Cables: CA-2002, CA-2010, CA-2020.
12:28 02.06.2020