09:52 23.06.2017
Watch List
Watch List
Noted Products
Price on request
Log in

Forgot your password? Registration
Forgot your password?
Forgot your password?
Industrial Computers and Solutions for Automation and Communication
Frankenring 6 30855 Langenhagen Germany
Price on request
Discount -

NEX 883 – micro-ATX mainboard for a lot of industry applications

The NEX 883 is an industrial micro-ATX mainboard, which supports the powerful Intel Core i3/i5/i7 processors of the 2. and 3. generation as well as the Intel Celeron CPUs for the LGA1155 socket. The motherboard can be equipped with up to 32GB 1066/1333/1600/2133MHzDDR3RAM in dual channel configuration, which can be placed in four sockets.

NEX 883

You can find similar products under
MicroATX CPU Boards.

Order information
or by Phone: +49 (0)511 807 259 0

The Q77 platform controller hub allows simultaneous control of two displays over HDMI, DVI-I, VGA and Display Port or LVDS (2ch/24bit). Furthermore the chipset supports 12x USB (4 x USB3.0, 8 x USB2.0), 4x RS232, 2x RS232/422/485 as well as 2x Intel Gbit LAN (one with AMT 8.0 remote management technology). Moreover, remote boot via LAN is possible thanks to PXE function. Connection of data storage devices is provided by 2x SATA 2.0 and 2x SATA 3.0, which support RAID 0, 1, 5, 10. RAID functions allow high-performance as well as securing of single arrays against disk drive failures. Additionally a mSATA module can be installed as SSD drive. 

The NEX 883 possesses sound possibilities for system extensions by 1x PCIe x16 (Gen. 3.0/ 2.0 by CPU), 1x PCIe x4 as well as 2x PCI (v2.3) slots. 

The NEX 883 micro-ATX board can be operated in AT as well as in ATX mode and is designed for temperature range between 0°C and 60°C. By its compact form size of 244x244mm the board can flexibly integrated in 1U, 2U or 4U rack or desktop chassis. Thus the board is a very good solution for a lot of industry applications.


  • i3/i5/i7 3rd generation Intel Core Processor (socket rPGA989B)
  • Intel HM76 Mobile Express Chipset (optional QM77)
  • 2x 204-Pin SO-DIMM Socket for maximum 16GB DDR3 133/1600MHz SDRAM
  • 1x Mini-PCIe support mSATA or I/O e.g. WLAN or 3G (SIM Card holder on board)
  • 1x PCI x16 (x16 Slot) and 2x PCI x1 (Golden Finger Connector)
  • DVI-I, HDMI and LVDS 48Bit (optional 2x LVDS 48 Bit)
  • 4x SATA with RAID 0,1,5,1
  • 2x Intel Gbit Ethernet
  • 10x USB (4x USB 3.0, 6x USB 2.0)
  • 4-in/ 4-out GPIO
  • Audio Codec ALC886 for High Definition Audio, 1x Mic-in, 1x Line-Out, 1x Line-In
  • 6x serial ports (5 x RS232, 1 x RS232/422/485)
  • AT/ATX mode and dual +12VDC/+24VDC power supply

Further News

TK2A70: a compact embedded PC for Automation & IoT
The control of automation and IoT devices requires a not to be underestimated degree of computational power, in order to be able to control the complex processes and data surveys. The compact TK2A70 embedded computer combines the established TASK chassis with the 3.5" 3I390AW motherboard, which supports Intel Apollo Lake CPUs, in which case installed the N4200 quad core CPU, which is an embedded SoC.
PC-based automation factory with the NISE-3600
Computer-based automation solutions for factories require small, powerful embedded computers such as the NISE 3600, which can be equipped with powerful processors and have the most important industrial interfaces.
Fanless Compact Rugged Railway Computer nROK-1020 with Intel Atom x5-E3930
The nROK-1020-A is a Fanless entry lever Railway PC designed specifically for the harsh environments of on locomotive applications. Thanks to compact design, it is easy to be located without compromising its features.
09:52 23.06.2017