18:31 25.05.2019
+49 511 807 259-0,
Price on request
Discount -
Favorite products

Forgot your password? Registration
Forgot your password?
Forgot your password?
+49 511 807 259-0,

Gateway HRT-710 has lost 3 times and became the HRT-310

ICP DAS company has released a new gateway HRT-310 - is an analogue of the HRT-710, but only in the new narrow body. The gateway is designed to connect HART devices and converting the HART protocol in Modbus RTU / ASCII protocol.

Differences between gateways HRT-710 and HRT-310 are shown in Table.

Differences HRT-710 HRT-310
Installation on a DIN-rail Horizontal Vertical
Width of the module 72 mm 25 mm
Loop Power No Yes, to +30 V output
Built-in resistor 250 Ohm, 0.25 W 250 Ohm, 1W

As can be seen from the table new gateway become about 3 times thinner!

In addition, the gateway has received a more powerful built-in resistor, which allows you to connect up to 15 HART devices without having to connect an additional external resistor.

Another feature is the ability to power the current loop from the gateway.

Features of gateway HRT-310:

  • Support HART Short/Long frame
  • Support HART Burst mode
  • Allow two HART Masters
  • Working in point-to-point or multi-drop HART mode
  • Connecting up to 15 HART modules
  • Support Modbus RTU and ASCII format
  • Support Modbus Slave mode
  • Support firmware update via Com Port. (FW_v1.2 and HW_v1.2)
  • Support on-line replacement of HART devices. (FW_v1.5)
  • Support acquire Long Frame Address automatically (FW_v1.5)
  • Isolated COM Port : RS-232/422/485
  • Provide LED indicators
  • Built-in Watchdog
  • DIN Rail or Wall Mounting
  • Dimensions 25x116x120 mm (W x L x H)

For HRT-310, you can find user manual, datasheet, and quick start.

For any question feel free to contact our experts IPC2U


18:31 25.05.2019