BT9A3 – a compact COM Express Module

Imagine getting something that is in-between a full sized computer and a microcontroller. That's a computer-on-module for you. Commonly abbreviated as COM, this small circuit board can be used practically in any electronic device. What does it offer? It provides a solid package of computer system.

You can find similar products under CPU modules. Order information Contact: sales@ipc2u.de  PHONE: +49 (0)511 807 259 0

What Is So Special About Computer-on-Module?

To start with, it is the board's size. Its slight physical size with essentials like I/O or input or output controllers and a processor makes it a space saver in any electronic device. The system is embedded into this small board. It is like a single board tiny computer. Upgrading the CPU is very easy because of its configuration. There is no necessity to spend more money for creating a new design of carrier. In other words, money can be saved in the event of relevant CPU upgrading. COM operates using low power. This too is cost saving especially in the long run. Another benefit of not having to redesign or build another carrier is in terms of development time. Using COM means shorter development time.       

Why Should You Choose BT9A3 Series?

This particular model is classified as COM Express Mini, Type 10. It has Intel Atom E3800 Series, Intel Celeron processor and other electronic chips on it. Offering low powered output and capable of working in a broad range of temperature, this Computer-on-Module board has an embedded system in an ultra-compact design. Its physical size is merely 84mm by 55mm. The most outstanding feature is its damage free intelligence system, which gives overheat, fan speed and voltage failure alarm. It also comes with various optional features like heat sink with fan.
For those who are looking for a low powered COM Express Module that can operate effectively in a wide range of temperature, the BT9A3 Series might be the answer.

Features:

• COM Express Mini Card
• Intel Atom / Intel Celeron CPU
• 22-nm process technology
• 2GB / 4GB ECC DDR3L on board
• Support DDR3L 1333 (-E45 / -E27 / -J00 / -N30 / -N07)
• Support DDR3L 1066MHz (-E26 / -E25 / -E15)
• Supports 4GB, 8GB and 16GB eMMC onboard (optional)
• Intel HD Graphics
• Supports LVDS and DDI interfaces
• LVDS: NXP PTN3460, 24-bit, dual-channel, resolution up to 1920x1200 @ 60Hz
• Digital Display Interface: HDMI, DVI and DP
• HDMI, DVI: Resolution up to 2560x1600 @ 24Hz
• DP: resolution up to 2560x1600 @ 60Hz
• I210AT Intel Gigabit Ethernet Controller
• Integrated 10/100/1000 transceiver
• Fully compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supports 1 x USB 3.0, 8 x USB 2.0
  - 4 integrated USB 2.0
  - 1 USB HSIC for 4 USB 2.0
• Supports 3 PCIe x1 (standard); or one PCIe x4 (PCIe port 3 parts with onboard LAN standard)
• Suppotrs 2 serial ports (TX / RX)
• Supports 8-bit digital I / O
• Dimensions: - 84 mm (3.30 ") x 55 mm (2.16")
• PICMG COM Express R2.1 type 10 compilant

Similar products of the CPU Modules Series:

• ICES-122
  ETX Module with AMD Geode LX800 500MHz CPU with VGA,
  ISA, PCI, IDE, LDVS, COM, LPT, USB, Ethernet, Audio, RoHS
  
• ICES-170
  ETX Module supporting socket Intel Atom N270 CPU with VGA,
  ISA, PCI, IDE, LDVS, COM, LPT, USB, Ethernet, Audio, RoHS
• ICE-QM871-i3E-R10
  COM Express Basic Type 6 module with Intel Core i3 - 4102E processor 1.6GHz, up to 16GB DDR 3, VGA, LVDS, 3xDDI, GbE LAN, 2xCOM, 12xUSB, PCIe x16, 4xSATA 3.0, HD Audio